Model Engineer  |  4666
"Norm Norton tackles the rather complex plumbing on his rebuilt Modelworks 5 inch gauge Britannia Class 7 locomotive.
Rhys Owen reveals the workings of displacement lubricators and their close relatives, hydrostatic lubricators before going on to discuss the operation of the mechanical lubricator.
David Fulton presents a design for a steam regulator with a finely graduated opening and a positive shut-off.
Adrian Garner engraves the sidereal and outer chapter rings for his astronomical bracket clock and cuts the teeth on the sidereal wheel.
Doug Hewson makes the top covers for his 5 inch gauge GWR pannier tank and goes into detail with the making of the tank fillers.
Jason Ballamy moves on to the eccentric and eccentric strap for his Thompstone mill engine, then makes the valve, valve rod and guide.
Terence Holland equips his 5 inch gauge 0-6-0 Barclay well tank with a set of drain cocks and a crosshead pump.
Jacques Maurel makes the punches for his rotary broach and provides some important information about the sizes of pre-drilled holes.
Peter Seymour-Howell, having completed the tender for his 5 inch gauge Flying Scotsman locomotive, makes a start on the locomotive itself by making the front bogie."
Seguir leyendo
leer menos
omo abonado recibirá las siguientes ventajas:
• Un descuento sobre el PVP de su revista
• Su revista en su dispositivo cada mes
• Nunca te perderás un número
• Estás protegido de las subidas de precios que puedan producirse más adelante en el año
Recibirás 26 problemas durante un año Model Engineer suscripción a la revista.
Nota: Las ediciones digitales no incluyen los artículos de portada ni los suplementos que encontraría en los ejemplares impresos.
Artículos de este número
A continuación encontrará una selección de artículos en Model Engineer 4666.