Model Engineer  |  4646
"Doug Hewson makes a Stroudley regulator for his 5 inch gauge GWR pannier tank locomotive.
Robert Hobbs makes the eccentrics for his 3½ inch gauge GWR 4-4-0 County of Devon and finds a suitable boiler barrel for it in his scrap bin.
Helmut Heitzinger makes a jig for machining the high and low pressure support columns for his Musgrave compound engine and makes a set of sleeves for the rotary valves.
Terence Holland begins the description of the construction of the 0-6-0 variant of his 5 inch gauge Barclay well tank by making a start with the main frames and buffer beams.
Richard Williams reworks a standard ball valve to make a better regulator for his 5 inch gauge ‘Black 5’ locomotive.
Frank Cruickshank describes the construction of a ‘glass’ case to house your model, made from Perspex and wooden mouldings easily obtained from your local DIY store.
Graham Langer reviews the design of the crank axle for the A1 Steam Locomotive Trust’s latest project.
Chris Gunn makes and fits the oak cleading to his 6 inch Garrett 4CD tractor.
Roger Backhouse visits the largest steam engine in the world – the Cruquius pumping engine on the Haarlemmermeer near Amsterdam."
Per saperne di più
leggere di meno
Come abbonati riceverete i seguenti vantaggi:
• Uno sconto sul prezzo di vendita della rivista
• La vostra rivista viene consegnata ogni mese sul vostro dispositivo
• Non perderete mai un numero
• Siete protetti dagli aumenti di prezzo che potrebbero verificarsi nel corso dell'anno
Riceverete 26 edizioni durante un periodo di 1 anno Model Engineer abbonamento alla rivista.
Nota: le edizioni digitali non includono gli articoli di copertina o i supplementi che si trovano nelle copie stampate.
Articoli in questo numero
Di seguito una selezione di articoli in Model Engineer 4646.